GAS TURBINE COMPRESSOR CLEANER
Solvent based concentrate for ON LINE and OFF LINE use
CONNTECT 7000 is a concentrated solvent-based gas turbine compressor cleaner designed for both ON LINE and OFF LINE cleaning. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. The ash free ingredients in CONNTECT 7000 have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine and this product contains special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers.
CONNTECT 7000 forms a homogeneous emulsion when mixed with 1 part cleaner to 4 parts water. CONNTECT 7000 can be injected directly into the compressor of the turbine while it is operating for ON LINE cleaning extending periodic OFF LINE cleaning intervals and reducing average power loss. CONNTECT 7000 is used at the same dilution ratio for OFF LINE cleaning, and following normal soak and rinse procedures the power recovery is usually significant. CONNTECT 7000 should not be used undiluted.
The method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning. Consult engine manufacturer recommendations for method and amount to use. Also note that cleaning at low ambient temperatures should not be done without the approval of your engine manufacturer and the use of an approved anti-freeze agent.
CONNTECT 7000 is available in concentrated form in non-returnable 5-gallon steel pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).