GAS TURBINE COMPRESSOR CLEANER
Low Foam Water based concentrate for ON LINE and OFF LINE use
CONNTECT 6000 is a concentrated high performance low foam water based gas turbine compressor cleaner designed for both ON LINE and OFF LINE cleaning. Field experience indicates that this non-toxic product attains cleaning efficiencies similar to solvent-based cleaners. The ash free ingredients in CONNTECT 6000 have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, and this product contains special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers.
CONNTECT 6000 is generally mixed at 1 part cleaner to 4 parts water. CONNTECT 6000 can be injected directly into the compressor of the turbine while it is operating for ON LINE cleaning extending periodic OFF LINE cleaning intervals and reducing average power loss. CONNTECT 6000 is used at the same dilution ratio for OFF LINE cleaning, and following normal soak and rinse procedures the power recovery is usually significant.
The method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning. Consult engine manufacturer recommendations for method and amount to use. Also note that cleaning at low ambient temperatures should not be done without the approval of your engine manufacturer and the use of an approved anti-freeze agent.
CONNTECT 6000 is available in concentrated form in non-returnable polyethylene 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).